Expert Answers about Chevrolet Transmission Coolers
- Transmission Cooler Recommendation to Replace a Faulty Cooler in a 2006 Nissan Xterra
- Aftermarket transmission coolers are typically marketed as supplemental coolers, not replacement coolers. If you are looking to replace your OEM transmission cooler due to a leaky or damaged cooler, then you will want to install the largest transmission cooler that will fit in the space available. The ideal place to install this cooler would be in front of the AC condenser or radiator to allow for adequate air flow.
I would recommend looking at the Derale Series 9000 Plate-Fin Cooler,...
view full answer... - Do I Need Transmission Cooler When Towing 21 Ft, 3000 lb Boat w/ 2006 Dodge Durango
- One guideline you can use to determine if you need a transmission cooler is to check your vehicle owners manual. The owners manual should state if it is recommended to add an aftermarket transmission cooler for towing.
You cannot over cool transmission fluid, especially when towing. Even a slight drop in the temperature of the fluid can help extend the life of the transmission. So, adding a transmission cooler can be beneficial, especially if you will be towing often.
To choose the correct...
view full answer... - Is Transmission Cooler Needed for 2006 Saturn Vue Doing Light Duty Towing
- For short distance very light towing in moderate temperatures you probably do not have to install a cooler for your transmission. That said, additional cooling of your transmission fluid over and above what is provided by the OEM cooler is never a bad idea. At the very least you'll want to make sure you've had your transmission serviced at the recommended intervals to ensure its fluid is clean and at the correct level. That may very well be enough for your light-duty application.
Your...
view full answer... - Is a Transmission Cooler Required for a 1992 Dodge B250 V8 for Towing a 1500 lb Tent Trailer
- Adding a transmission cooler is never a bad idea. Anytime you are towing a trailer, the engine and transmission have to work harder. Keeping your transmission fluid at a lower temperature will prolong the life of your transmission.
One factor that you can look at to determine if a supplemental transmission cooler would be absolutely necessary is the towing capacity of your 1992 Dodge B250. If the weight of your tent trailer is near the towing capacity of your van, I would strongly recommend...
view full answer... - Transmission Cooler for 2005 Honda Accord V6.
- The Derale # D13611 transmission cooler isn't designed to replace the factory transmission cooler, it's designed to supplement it. The cooler installs inline on the return line from the factory cooler back to the transmission. The heat exchanger portion would ideally be installed directly behind the grillwork, in front of the radiator. If you use the provided link, my buddy David will run through how the cooler works. I'll also link to some help articles about transmission coolers.
view full answer... - Transmission Cooler Recommendation for 2013 Nissan Pathfinder SL
- All vehicles with automatic transmissions have a transmission cooler factory installed. Based on my research of your 2013 Nissan Pathfinder SL, it does not appear that your vehicle comes with any additional coolers or a larger transmission cooler than is the manufacturer standard.
You can have your dealer run the VIN on your vehicle and that will provide a run down of the various options that it is equipped with. If you want to add an additional cooler, they are not vehicle specific. You...
view full answer... - Transmission Cooler Recommendation for a 2009 Acura MDX
- I would recommend you get a supplemental transmission cooler for your vehicle if you plan on towing. The factory transmission cooler is often adequate at best for non-towing situations, so a supplemental cooler would greatly help extend the life of your transmission.
Transmission coolers are not vehicle specific, you will need to measure the area in front of your radiator to determine what size cooler will fit and pick the one with those dimensions. If you can fit it, I would recommend...
view full answer... - What Fittings Are Available For Connecting A Transmission Cooler To A 2007 Chevrolet Tahoe
- Here are some of the fittings that I have available that are used to connect a transmission cooler to a radiator on a 2007 Chevy Tahoe. You might want to try and measure the fitting size that is on your vehicles radiator.
The Derale Insta-Dapt Radiator Adapter, # D13004, is used in the transmission coolers that we sell. It is a radiator adapter that fits most vehicles with 5/16 inch transmission lines.
The Derale Radiator Adapter Fittings for GM, # D13018, are 5/8 inch inverted flare...
view full answer... - Auxiliary Transmission Cooler for 2019 Ford Expedition with 3.5L EcoBoost Engine
- A transmission cooler isn't a vehicle-specific item. As long as your transmission has two lines running from the transmission to the radiator, and you have the available space on the front of the radiator directly behind the grille, you can install a cooler.
Unless you live in a climate that's freezing most of the year, it's recommended to get the largest transmission cooler that will fit in the available space. If you have 11 x 8-3/4 inches of available space, the Derale # D13503 transmission...
view full answer... - What Size Fittings for a Transmission Cooler Does a 2008 Dodge Grand Caravan, 3.8L, Use
- The 2008 Dodge Grand Caravan with a 3.8 liter engine will need either an 11/32 inch hose barb fitting, which is included with the Derale Transmission Cooler, # D13503, or it will need a 1/2 inch NPT x 3/8 inch fitting. I have included a link to our transmission cooler accessories main page which includes numerous fittings and adapters for you to view.
An aftermarket transmission cooler should be used to supplement the existing cooler, and not replace it, for optimum performance. I have...
view full answer... - Transmission & Oil Coolers for 2015 Ford Explorer
- To get your 2015 Ford Explorer ready for towing you can add both a transmission cooler and an oil cooler if you want. We offer individual coolers that can handle either oil or transmission fluid, and also 2-core combination coolers that can handle both.
For an efficient Class III transmission cooler I recommend Derale's kit # D13503. I linked an installation video showing this being installed in an Explorer. You'll install this cooler on the transmission's existing return line where it...
view full answer... - Is a Transmission Cooler Needed to tow an 1800lb Camper with a 2009 Subaru Forester
- A transmission cooler is not necessarily mandatory for towing, but you will definitely want to check your owners manual to see if there are any stipulations from Subaru saying a cooler is required.
You will sometimes see that the vehicle manufacturer requires a transmission cooler be installed for towing purposes, just to retain the vehicle warranty.
The Derale Transmission cooler # D13502 would be a good choice for your 2009 Subaru Forester. It would work well for your application,...
view full answer... - Recommended Transmission Cooler For A 2007 Dodge Ram Pickup
- When it comes to installing a transmission cooler on your 2007 Dodge Ram Pickup The Derale Series 8000 Plate-Fin Transmission Cooler Kit w/Barb Inlets - Class III - Efficient # D13503 will be a good choice for your vehicle. I recommend using just one cooler. I would use just one large cooler.
Using this cooler will prolong the life of your transmission and improve its overall performance, specifically designed for Dodge Ram Pickups with late-model, electronic overdrive transmissions. The...
view full answer... - Recommended Transmission Cooler For A 2014 Toyota Tundra 4.6 Engine
- When it comes to installing a transmission cooler in your 2014 Toyota Tundra with a 4.6 engine The Derale Series 8000 Plate-Fin Transmission Cooler Kit w/Barb Inlets - Class III - Efficient # D13502 is confirmed to fit your vehicle.
The Derale cooler prolongs life of the transmission, improves overall performance, and prevents heat-related failures. The cooler has a furnace-blazed aluminum construction.
I attached a review video link below.
view full answer... - Parts Needed to Install Derale 15301 Cooler in 2009 Nissan Frontier 4.0
- I spoke with my contact at Deraile and he said to install the Derale Combination Transmission/Engine Oil Cooler # D15301 on your 2009 Nissan Frontier you will need installation kit # D15751 and Derale -8 AN Female Swivel x 1/2" Barb Hose Fitting # D98202. It comes with a thermostatic controlled sandwich adapter so that it will allow your vehicle to reach operating temperature.
The Derale Remote Transmission Filter Kit w/ Temperature Gauge # D13091, that you referenced would be a good...
view full answer... - Recommended Transmission Cooler for 2017 Honda Pilot with Factory Cooler
- You can use the Derale # D13503 on your 2017 Honda Pilot as long as your Pilot doesn't have the 9 speed automatic transmission and it will do a great job to help keep your transmission from overheating while towing; this is the largest cooler available for the 2017 Pilot. This cooler fits on 5/16" transmission lines, which will be the same as those found on your vehicle, so you won't need any additional parts. This cooler will work as a supplement to your existing transmission cooler. ...
view full answer... - Recommended Transmission and Power Steering Cooler for 2017 Kia Sedona LX
- In order to add a transmission cooler to your 2017 Kia Sedona LX, I recommend the Derale Series 8000 Plate-Fin Transmission Cooler Kit part # D13504 which will be plenty for your Sedona LX. The plate fin cooler will do a good job of dispersing any heat that might build up in the fluid and keep your transmission from overheating while towing.
For a power steering fluid cooler you can use the Derale 2-Pass Tube-Fin Power Steering Cooler with Offset Mounting Bracket - 8-1/8" Wide # D13210...
view full answer... - Can I Run Two Transmission Coolers on a 2010 Chevrolet Tahoe?
- If you're planning on keeping your OEM transmission cooler then you will want to measure the space you have left to ensure you have enough room to add an aftermarket cooler to your set up. You will also want to make sure you are not blocking too much of your radiator and causing your engine to overheat. The Derale Series 8000 Plate-Fin Transmission Cooler Kit w/Barb Inlets - Class III - Efficient item # D13503 you referenced is 11" Wide x 8-3/4" tall x 7/8" deep. You would be able to connect...
view full answer... - Fitting Needed to Install Transmission Cooler on 2003 Chevy Silverado Without Cutting Lines
- The Derale # D13035 you'd looked at is the fitting you'll need to install a transmission cooler like # D12903 on your 2003 Chevy Silverado 1500. The # D13035 will allow you to install a transmission cooler without cutting the existing transmission lines, as you can see in the video I've linked for you.
The video shows a transmission cooler being installed on a 2003 Chevy Avalanche, but the procedure would be identical for your Silverado.
view full answer... - Do I Need Any Extra Parts To Install Derale Transmission Cooler # D13503 On My 2002 Jeep Liberty
- I contacted our representative at Derale and he informed me that you will not need any additional parts to install the Derale Transmission Cooler, part # D13503, on your 2002 Jeep Liberty. All the needed parts and fittings come included.
The ideal place to mount a transmission cooler for maximum cooling efficiency is behind the grille but in front of the radiator. You will need to measure to see if there is room to mount the cooler. Part # D13503 measures 11 inches wide, 8-3/4 inches tall,...
view full answer...
Go To Results